You will only end up breaking the binding between the match/wire and the key or even pushing the key further into the lock. Important note: Even after the match/wire has stuck to the key, do not attempt to turn the key in the lock to open the door. Wait for the glue to bind and then pull your wire/match and the broken key away from the lock. Make sure you don’t apply too much pressure that you end up pushing the key further into the lock. Second, hold the match or wire against the edge of your broken key, applying enough pressure that will cause it to stick to the broken key. Too much glue might harm your lock while too little glue will keep it from sticking to your broken key. The superglue method works best when there is a little bit of the broken key that can still be seen.įirst, you need to get a small wire or match and place enough glue on it (make sure there isn’t too much or too little). At the same time, this method requires a lot of care and can fail if you don’t do it properly or if the key is pushed too far back into the keyway and no metal is visible. Most homes have super glue so this can save you a trip to the hardware store. If you’ve tried the broken key extractor set or even the tools in your toolbox and it still doesn’t seem to work, you can try using superglue.
You can also try using tweezers to grip the key blade. Often, it will take several attempts of turning and pulling before your broken key comes out. This allows the blade to go in easier and to hook the key factor (similar to how a broken key extractor does it). If necessary, break the blade with needle nose pliers so you can insert the serrated edge into the lock at an angle so the serrations are pointing back to you. You will need to get a thin piece of metal that will fit in your keyway alongside the broken key. If extracting a broken key stuck in the lock is a rare occurrence and you don’t have the broken key extractor set with you, you can try creating a mini hacksaw blade, especially if you have access to a toolbox. These tools are small enough to enter your keyhole but strong enough to be able to pull your key out.Īccording to United Locksmith, such tools sets are the “professional solution to this problem” ( source), and we recommend a broken key extractor if you’re dealing with a lot of locks on a daily basis.
DIY BROKEN KEY EXTRACTOR FREE
When you place a tool inside your lock, alongside the biting of the key, you are trying to hook the teeth of the key with the hooks of the extractor so you can pull it free from the lock. One such example is the Bulletshaker Smartgood Broken Key Extractor Set which is small enough to carry around so you have tools on hand if you accidentally break a key in any lock. #3 Use a broken key extractor setĪ broken key extractor set is a great help if you often find yourself dealing with broken keys.įortunately, Amazon sells a number of tools that can help you if you ever find yourself with a broken key stuck in a lock. Also, if you’ve noticed that your lock has been rather difficult to operate recently, you might want to spray some penetrating oil into the keyhole to avoid a situation like this. Spraying penetrating oil will loosen up the works (or the lock mechanism) and make it easier to extract your key as well as help prevent a similar situation from recurring in the future. #2 Spray a penetrating oil to loosen up the works You could actually make it worse when you try to pick up the broken key too quickly and end up pushing it further away which will make it more difficult to get out. Unfortunately, panicking makes it harder to remove the key, especially if you try to rush things. It’s hard not to panic when you’ve broken the key to your door, and now you can’t enter your home or your room. Is your key broken with one-half of it stuck in the lock? Here’s a step-by-step guide on what to do to get your broken key out of the lock: #1 Do not panic The best way to get a broken key out of the lock
0 kommentar(er)
